Parkside 332967_1907, Operation And Safety Notes

Page: 68 / 118

67 GB/MT
reduce the quality of the
welding work.
„
Arc welding creates sparks,
molten metal parts and smoke.
Therefore ensure that: All
flammable substances and/or
materials are removed from the
work station and its immediate
surrounding.
„
Ensure the work station is
ventilated.
„
Do not weld on containers,
vessels or tubes that contain or
contained flammable liquids or
gases.
Avoid any
form of direct contact with the
welding current circuit. The
open circuit voltage between
the electrode holder and earth
terminal can be dangerous,
there is a risk of electric shock.
„
Do not store the device in a
damp or wet environment or in
the rain. Protection rating IP21S
is applicable in this case.
„
Protect your eyes using the
appropriate protective glasses
(DIN level 9-10), which are
fastened to the supplied weld-
ing mask. Wear gloves and
dry protective clothing that are
free of oil and grease to pro-
tect the skin from exposure to
ultraviolet radiation of the arc.
Do not use
the welding power source to
defrost pipes.
Please note:
„
The light radiation emitted by
the electric arc can damage
eyes and cause burns to the
skin.
„
Arc welding creates sparks
and drops of melted metal.
The welded workpiece starts
to glow and remains hot
for a relatively long period.
Therefore, do not touch the
workpiece with bare hands.
„
Arc welding can cause
vapours to be release that
may be hazardous to health.
Be careful not to inhale these
vapours.
„
Protect yourself from the
harmful effects of the electric
arc and keep people that are
not involved in the work away
from the arc maintaining a
distance of at least 2 m.
ATTENTION!
„
During the operation of the
welding device, other consum-
ers may experience problems
with the voltage supply
depending on the network
Safety instructions