Parkside 327358 1904, Operation And Safety Notes

Page: 8 / 145

8 GB/CY
Use the product only as described and only
for the specific applications as stated. Keep
these instructions in a safe place. Ensure you
hand over all documentation when passing
the product on to anyone else. Any use that
differs to the intended use as stated above is
prohibited and potentially dangerous.
Damage or injury caused by misuse or
disregarding the above warning is not
covered by the warranty or any liability on
the part of the manufacturer. The device
is not intended for commercial use.
Commercial use will void the guarantee.
RESIDUAL RISK
Even if you operate the device as intended,
there will be residual risks.
Following hazards may occur in conjunction
with the construction and design of this
plasma cutter:
„
Eye injuries due to glare,
„
Touching hot parts of the device or
workpiece (burn injury),
„
In case of improper protection risk of
accident and fire through sparks and
slag particles,
„
Harmful emissions from smoke and gases
if there is a lack of air or if closed rooms
are insufficiently extracted.
Reduce the residual risk by carefully using
the device as intended and observing all
instruction.
• Package contents
1 plasma cutter
1 ground cable with terminal
1 cutting cable incl. cutting torch
1 compressed air hose with Quick-Connect
2 hose clamps
3 electrodes (1 pre-assembled)
1 set of operating instructions
3 burner sleeves (1 pre-assembled)
1 Removable roller guide
• Parts description
PLEASE NOTE!
f
After unpacking the product, please
check that all of the package contents
are present and that the device is in
perfect condition. Do not use the device
if it is defective.
1 Plasma cutter
2 Handle
3 Mains plug
4 Ground terminal
5 Ground terminal plug
6 Plasma burner power plug
7 Plasma burner plug
8 Plasma burner
8a Plasma burner button
8b Nozzle clamping sleeve
8c Burner sleeve
8d Electrode
8e Diffuser
9 Overheat protection indicator lamp
10 Plasma burner power socket
11 Ground terminal connection socket
12 Plasma burner connection socket
13 Current controller
14 Mains indicator lamp
15 Quick connector compressed air hose
16 Compressed air hose
Introduction
327358_Plasmaschneider_PPS_40_B2_content_LB7.indb 8 13.09.2019 08:42:43