Parkside 322485-1901, Translation Of The Original Instructions

Page: 8 / 40

PMFS 200 C3
GB
│
IE
│
NI
│
CY
│ 5 ■
h) Keep handles and grasping surfaces dry,
clean and free from oil and grease.
Slippery
handles and grasping surfaces do not allow for
safe handling and control of the tool in unex-
pected situations .
5 . Service
a) Have your power tool serviced by a qualified
repair person using only identical replace-
ment parts.
This will ensure that the safety of
the power tool is maintained .
b) Always arrange for the replacement of the
plug or the power cord to be carried out by
the manufacturer of the appliance or by his
approved customer services.
This will ensure
that the safety of the power tool is maintained .
Appliance-specific safety instructions
■ Secure the workpiece . A workpiece securely
held by a clamping device or vice is much safer
than one held in your hand .
■ Do not rest your hands next to or in front of the
appliance and the area being worked as there
is a risk of injury if you slip .
■ In the event of danger, remove the mains plug
from the socket immediately .
■ Always route the power cable towards the rear,
away from the appliance .
■ RISK OF FIRE DUE TO FLYING SPARKS!
If you sand metal, sparks will be produced .
Therefore, make sure that nobody is at risk and
that no combustible materials are located in the
immediate vicinity of where you are working .
■ Hold the power tool by the insulated gripping
surfaces, as the grinding surface could hit its
own cable.
Damage to a live wire may make
exposed metal parts of the power tool live and
could give the operator an electric shock .
WARNING! TOXIC VAPOURS!
► Working with the tool can produce harmful/
toxic dusts that represent a health hazard for
the person operating the appliance and for
any other people in the area .
WARNING!
RISKS DUE TO DUST!
► When working for extended periods of time
on wood and, in particular, materials that
produce dust which is hazardous to health,
connect the appliance to an appropriate ex-
ternal dust extraction appliance .
Wear safety
goggles and a protective dust mask!
■ Ensure sufficient ventilation when working on
plastics, paints, lacquers, etc .
■ Do not soak the materials or the area to be
processed with liquids containing solvents .
■ Never work on moistened materials or damp
surfaces .
■ Avoid sanding lead paint or other harmful
materials .
■ Materials containing asbestos must not be
processed . Asbestos is a known carcinogen .
■ Avoid contact with the sanding sheet while the
appliance is running!
■ Do not use the appliance without a sanding
sheet fitted .
■ Never use the appliance for other purposes
and only use original parts/accessories . Using
attachments or accessory tools other than those
recommended in the operating instructions can
lead to a risk of injury .
■ Always allow the appliance to come to a
complete standstill before putting it down .
■ The appliance must always be kept clean, dry
and free from oil or grease .