Parkside 321053_1901, Translation Of The Original Instructions

Page: 40 / 61

PKHAP 20-Li A1
■
36
│
GB
│
MT
Operation
Select operating mode
WARNING!
► Do not press the function selector switch
until the appliance has come to a complete
standstill . Switching between functions while
the tool is still rotating can damage the
appliance .
Function selector switch:
♦ Press and hold the release button on the
function selector switch . Turn the function
selector switch so that the required symbol
engages at the arrow mark:
Function Symbol
Drilling
Hammer drilling
Chisel position
adjustment
Chiselling
Adjusting the chisel position:
You can rotate the tool to the required position for
chiselling using this function .
♦ Turn the function selector switch to the
position .
♦ Turn the tool in the tool holder to the re-
quired position .
♦ Turn the function selector switch to the
position for the chiselling function .
Preselecting the rotation speed
You can use the rotation speed preselector dial
to preselect the rotation speed . Level 1 (low rota-
tion speed) up to level 6 (high rotation speed)
Work out the correct settings by carrying out a test:
- Level 3–6: high speed: for hammer drilling/
chiselling in concrete or stone
- Level 1–3: low speed: for drilling in steel or
wood
Switching on and off
Switching the appliance on:
♦ Press the ON/OFF switch .
Switching the appliance off:
♦ Release the ON/OFF switch .
Changing the direction of rotation
♦ Change the direction of rotation by pressing
the rotation direction switch towards the left
or right .