Parkside 321053_1901, Translation Of The Original Instructions

Page: 35 / 61

PKHAP 20-Li A1
GB
│
MT
│
31
■
Noise emission value:
Noise measurement value determined in accord-
ance with EN 60745 . The A-rated noise level of
the power tool is typically as follows:
Hammer-drilling:
Sound pressure level: L
pA
= 93 .6 dB(A)
Uncertainty K: 3 dB
Sound power level: L
WA
= 104 dB(A)
Uncertainty K: 3 dB
Total vibration value:
Total vibration values (vector total of three direc-
tions) determined in accordance with EN 60745:
Hammer-drilling (main handle):
a
h, AG
= 5 .677 m/s
2
, K = 1 .5 m/s
2
(additional handle): a
h, AG
= 6 .334 m/s
2
,
K = 1 .5 m/s
2
WARNING!
► The vibration level specified in these instruc-
tions has been measured in accordance
with the standardised measuring procedure
specified in EN 60745 and can be used to
make equipment comparisons . The specified
vibration emission value can also be used to
make an initial exposure estimate .
The vibration level varies depending on the
use of the power tool and may, in some
cases, be higher than the value specified in
these instructions .
NOTE
► Try to keep the vibration loads as low as
possible . Measures to reduce the vibration
load are, e .g . wearing gloves and limiting the
working time . Wherein all states of operation
must be included (e .g . times when the power
tool is switched off and times where the power
tool is switched on but running without load) .
General power tool
safety warnings
WARNING!
► Read all safety warnings and all instructions.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious
injury .
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery
operated (cordless) power tool .
1 . Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents .
b) Do not operate power tools in explosive atmos­
pheres, such as in the presence of flammable
liquids, gases or dust.
Power tools create sparks
which may ignite the dust or fumes .
c) Keep children and bystanders away while
operating a power tool.
Distractions can cause
you to lose control .