25
PSTD 800 A1
GB
■
After completing your work, switch the electric
tool off and do not pull the saw blade out
of the cut until the tool has come to a standstill.
This avoids kickbacks, and allows you to put
the tool down safely.
■
Only use undamaged saw blades that are in
perfect working order. Bent and blunt saw blades
can break or cause a kickback.
■
Do not try and slow the saw blade down
after switching off by applying lateral pressure.
The saw blade can be damaged, break or
cause a kickback.
■
Immobilise the workpiece securely. Use clamps/
vices to hold the workpiece firmly. This is much
safer than simply holding it in your hand.
■
Always run the power cord away from the
appliance to the rear.
■
Never work on moistened materials or wet
surfaces.
■
Hazards caused by dust!
When working for
extended periods on wood and, in particular,
materials that produce dusts that are hazardous
to health, connect the appliance to an appropri-
ate dust extraction appliance.
■
Wear a dust mask.
■
Ensure there is sufficient ventilation.
WARNING! Protect yourself from
laser radiation!
■
Never look directly into the laser beam or into
the opening from which it emerges.
WARNING!
►
Looking at a laser beam through optical
instruments (e.g. magnifying glasses etc.)
can cause eye injuries.
►
Caution! If operating and adjustment equip-
ment is used or procedures other than those
specified here are carried out, this may result
in hazardous radiation exposure.
■
Never aim the laser beam at reflective surfaces,
people or animals. Even brief visual contact
with a laser beam can result in eye injuries.
Original accessories/additional
equipment
■
Only use the accessories and additional
equipment that are specified in the operat-
ing instructions and are compatible with
the appliance.
Information on saw blades
The Parkside basic equipment includes saw blades
for use with wood and metal.
▯
3 saw blades for general wood cuts
▯
1 saw blade for light metals up to 3 mm
NOTE
►
You can also use any other saw blades pro-
vided they are fitted with a suitable mounting
(single-lug shank).
Saw blade type
suitable
unsuitable
Summary of Contents for 114249
Page 3: ......
Page 4: ...30 mm 395 mm 110 mm 120 mm 65 mm 205 mm 30 mm 185 mm 260 mm 150 mm 30 mm 30 mm x 400 mm...
Page 14: ...10 PSTD 800 A1...
Page 24: ...20 PSTD 800 A1...
