PSSAP 2028 A1
■
48
│
GB
│
MT
6. Service
a)
Have your power tool serviced by a qualified
repair person using only identical replace-
ment parts.
This will ensure that the safety of
the power tool is maintained.
b)
Never service damaged battery packs.
Service
of battery packs should only be performed by
the manufacturer or authorized service providers.
Appliance-specific safety instructions
for sabre saws
To avoid the risk of injury or fire as well as
health risks
■
Hold the power tool by the insulated
gripping surfaces when performing work
where the power tool may hit hidden power
lines or its own power cord.
Contact with a
live wire may electrify exposed metal parts of
the power tool and could give the operator an
electric shock.
■
Secure and secure the workpiece to a
stable surface by means of clamps or
otherwise.
Holding the workpiece by hand
or against your body will cause it to remain
unstable, resulting in loss of control.
■
Wear a dust mask!
Safety guidelines for battery
chargers
■
This tool may be used by children
aged 8 years and above and
by persons with limited physical,
sensory or mental capabilities or
lack of experience and knowl-
edge, provided that they are
under supervision or have been
told how to use the tool safely
and are aware of the potential
risks. Do not allow children to use
the tool as a toy. Cleaning and
user maintenance tasks may not
be carried out by children unless
they are supervised.
■
To avoid potential risks, if the
appliance power cable is dam-
aged, it must be replaced by the
manufacturer, its customer service
or by a qualified technician.
The charger is suitable for indoor use only.
WARNING!
■
If the power cord requires replacement, this
should be carried out by the manufacturer or
an approved representative to avoid safety
hazards.
ATTENTION!
♦
This charger can only charge the following
batteries: PAP 20 A1/PAP 20 A2/
PAP 20 A3/PAP 20 B1/PAP 20 B3/
PAPS 204 A1/PAPS 208 A1.
♦
A current list of battery compatibility can be
found at www.lidl.de/Akku.
Summary of Contents for PSSAP 2028 A1
Page 3: ...A 13a...