Parksafe PS7009, Manual

Page: 11 / 36

11
AV Func on ( Reversing Camera op on)
The AV func on is designed for a reversing camera
When the AV is pressed on the monitor the rear camera will appear *
* If the camera is powered by igni
on feed, if the camera is powered by reverse feed the monitor
will display “NoSignal”.
The monitor can be wired to the reverse feed, so when you put the vehicle into reverse, the rear camera
will appear on the screen. This will over ride anything that is on the screen, once the vehicle is taken out
of reverse the screen will go back to the previous screen.
In the se ngs on the home screen you can choose to have
parking lines ON or OFF.
Tick or un ck the box at the end of “Reverse Lines”