Parks HP2000 XTREME Series, Installation And Operator'S Manual

Page: 29 / 68

●
For one water-Y at a time:
o
Cut the coolant hose between the hose crimpers.
o
Install the water Y with a hose clamp on each
side.
o
Tighten the two hose clamps.
o
Install a worm gear hose clamp and connect the
APU coolant hose to the clamp.
o
Tighten the worm gear hose clamp.
●
Once this has been completed for both Y’s, check that
the hoses and clamps are tight, and then remove the
hose crimpers.
29 |
​
Page