JINCHW09 Rev A 12/05/14
A combustible fire surround with a depth of up to
100mm requires a minimum clearance of 75mm
from the side of the stove. For combustible fire
surrounds with a depth in excess of 100mm this
clearance must be increased to 200mm.
Removing Internal Components
All internal components must be removed prior
to fitting the stove. This will make handling the
stove easier; allow access to fixings and the flue
outlet; as well as protect the internal
components from damage during the installation
process.
1.
Open the door(s) and remove the ashpan.
2.
Remove the fuel retainer by lifting off of its
supports and remove from firebox.
3.
Remove the catch bar (front plate) by lifting
until the widest section of the keyhole slots
are in line with the catch bar supports. Then
pull forward until clear of the supports and
remove.
Catch Bar / Front
Plate Support
