19
TROUBLESHOOTING
ISSUES
POSSIBLE CAUSES
SOLUTIONS / REPAIR
The monitor does not
display images within
a few seconds after
pressing the Wake Up
Button.
The signal
connection between
the monitor to
the camera is
interrupted.
If the indicator light flickers twice within a few seconds after
pressing the Wake Up Button but there are still no images
displayed even when you press any button on the monitor,
the connection between the monitor and camera may have
been interrupted. Please try the following steps:
A. Switch on the solar battery unit
If the solar battery unit is switched off, please press the
switch once. When the indicator light flickers once it means
the battery unit is on.
B. Charge your solar battery unit
The camera battery may be empty, please try again after
re-charging it.
C. Reconnect the monitor to the camera
Please try to pair the monitor with the camera as following
the steps in the "Pairing Selection" on page 16.
