10
3.1 MOUNTING THE MONITOR
When choosing a location to mount the monitor, make sure the monitor is in an area that will not obstruct your
vision while driving.
1. Before mounting the monitor, clean the mounting surface well.
2. Position the suction mount to a smooth surface that suits your requirement.
3. Press the suction cap against the smooth surface and press the lock down to attach and fix the mount to the
surface.
4. Snap in the monitor to the suction mount.
5. Adjust the mounting arms to suit your viewing angle of the monitor and tighten the screws on the mount to
fix the position.
6. Connect the power cable to the vehicle’s cigarette lighter socket 12V/24V power outlet. The cable must not
interfere with the safe operation of the vehicle.
7. Insert the small 12V/24V DC plug of the power cable into the right side of the monitor.
8. Plug the 12V/24V cigarette lighter plug into the vehicle’s cigarette lighter socket.
To maximize the effectiveness of the suction mount, it is recommended that the application be performed under
the following conditions:
• Surface temperature should be between 21 and 38 degrees Celsius.
• Application below 10 degrees should be avoided.
• Application should not occur in direct sunlight.
Mounting should be protected from exposure to direct sunlight for a period of 24 hours.
