11
NOTE:
• Before mounting the monitor, test the reception of the camera signal in several selected locations within
easy reach as one may have better reception than another. Finally, choose the best location with the best
signal reception.
1. Clean and dry the mounting surface before fixing the suction cup bracket.
2. Press the suction cup bracket against the mounting surface and push the suction cup lock lever down to lock
the suction cup.
3. Slide the monitor into the bracket. The angle of the monitor can be adjusted by loosening or tightening the
rotary knob.
4. Insert the monitor car charger into the 12/24V DC power supply.
NOTE:
1. For a decent and neat installation, you can hide the charging cable into the decorative seam around the
edge of the dashboard, and if necessary, bundle the additional wires with a cable tie.
2. If the 12/24V DC power port on your vehicle is always running, be sure to unplug the car charger before
leaving the vehicle to avoid the car battery draining out.
4.0 OPERATION
Please always pair the monitor and camera before the 1st operation (see below). A Maximum of 2 cameras can
be paired to the monitor.
• Before the first operation, it is highly recommended to use the supplied micro-USB cable to fully charge
the internal battery of the rear camera (please charge for at least 5 hours with a mobile phone adapter,
computer USB port or a USB-powerbank).
