Address:
Tel:
Email:
Web:
Manual opera
ti
on:
In the event of a power cut or other fault it will be necessary to move your gate in manual mode.
Manual opera
ti
on should only be a empted by a responsible adult. Before doing this always
switch the system off at the main isolator, your installer will have shown you where this is on your
system.
You can now move the gate manually. Only move the gate very slowly, no faster than it moves in
normal use. Your installer will have demonstrated this at handover.
To return the gate to automa c opera on (when the power is restored) simply follow the steps
above in reverse order:
120
Emergency opening: 120 mm
First you need to raise the automatic drop bolt as this is fail secure, to do this, use
the override key provided with the lock to unlock the cylinder, you can then slide
the bolt up by 120mm an out of the way, once this is done follow the below
instructions to manually open the gate leaf
Summary of Contents for PF9700
