Address:
Tel:
Email:
Web:
Parameter Function
Parameter
Display Adj. Range
Factory
Setting
P.925
P.999
0000
to
0003
0001
P.910
0 to 40
0
P.920
Diagnostic Parameters
Display mode selection
0 000: Limited parameters avaliable, most only viewable
0001: Limited parameters
0003: All parameters avaliable
6: power stage module tempreature displayed [°C]
7: power stage module tempreature displayed [°F]
8: Run time of the motor during last operation [Sec]
13: Reference voltage displayed [V]
14: Housing tempreature displayed [°C]
15: Housing tempreature displayed [°F]
29: Display the address of slave module (only on master)
39: Display the cos phi (power factor)
40: Display the momentary DC Bus current in percent of maximum continuously permissable DC Bus current
Error Memory
Shows the last 8 errors in the error memory
Eb1 - Eb8
Fault codes 1 - 8 (1 oldest - 8 newest)
EbCL
clear error log
Eb-
exit error log
Software version
Displays the version of the software that is currently being used
Password Level
0: The control sequence is displayed
1: The current travel speed is displayed [Hz]
2: The motor current is displayed [A]
3: The motor voltage is displayed [V]
4: The DC Bus current is displayed [A]
5: The DC Bus voltage is displayed [V]
Summary of Contents for PF9700
