Page 4
/ Bulletin 100-50-1
Parker Hannifin Corporation
Sporlan Division
206 Lange Drive • Washington, MO 63090 USA
phone 636 239 1111 • fax 636 239 9130
www.sporlan.com
122010 / Bulletin 100-50-1
© 2010 Parker Hannifin Corporation
Above are sample applications, many other applications are possible, including heat reclaim, subcooling and desuperheating. Please contact
SPORLAN DIVISION - PARKER HANNIFIN, Attn: Product Manager - Electronic Products for suggestions or questions.
TCB Controlling an Electric Evaporator Control Valve
TCB Controlling an Electric Hot Gas Bypass Valve
ORDERING INFORMATION
Evaporator
Air Sensor p/n 952669 or
Surface Sensor p/n 952662
TEV
TCB
24 Volts
CDS-8*, 9, 16 & 17
Evaporator
SDR 3 & 4
TEV
24 Volts
TCB
2
11
/
16
”
3
1
/
2
”
3
1
/
2
”
4”
1” max.
3
/
16
”
min.
VALVE
JUMPERS INSTALLED
CDS-8*
P8 - OPEN ON RISE
P11 - CDS-8
P7 - TEMP ENABLE
CDS-9, 16 & 17
P8 - OPEN ON RISE
P12 - ALL OTHERS
P7 - TEMP ENABLE
VALVE
JUMPERS INSTALLED
SDR-3 & SDR-3X
P9 - CLOSE ON RISE
P11 - CDS-8
P7 - TEMP ENABLE
SDR-4
P9 - CLOSE ON RISE
P12 - ALL ON OTHERS
P7 - TEMP ENABLE
Table 3
ITEM DESCRIPTION
ITEM #
TCB with Potentiometer
952664
TCB Less Potentiometer
952660
Air Sensor (-40°F to 210°F)
952669
Surface Sensor with Mounting Clip (-40°F to 210°F)
952662
SMA-12 Battery Powered Valve Actuator and Diagnostic Tool
953276
High Amp TCB to control 2 valves
952792
High Amp TCB with Potentiometer
952793
TCB quick response (EEV interface)*
952714
TCB for 24 VDC input, use standard
952687
-obsolete
*When used to control an Electric Expansion Valve (EEV), the external
controller must sense and control superheat. Failure to do so may lead to
floodback and system damage. Contact Sporlan with questions.
*CDS-8 is Obsolete
APPLICATIONS
Failure or improper selection or improper use of the products described herein or related items can cause death, personal injury and property damages.
This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users having
technical expertise.
The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance, maintenance,
safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning
the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors.
To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifications provided by the user, the user is responsible for
determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems.
WARNING – USER RESPONSIBILITY
