Parker Service Master CONNECT, Operating Manual

Page: 231 / 278

ENGLISH
When External CAN operating mode is active, you can set the Baud
rate for the CAN bus and connect up to 5 external sensors (max.
5 channels). Select a message type for each channel. The following
signal types are available:
■ CANopen PDO
■
CAN Generic
Define the parameters for the selected channel according to your ap-
plication.
Fig. 46 CAN-Y connection port, settings
For further information, refer to the
&
Technical Data related to the
sensors connected.
INFORMATION
When External CAN operating mode is active, the settings may only
be defined by properly trained technicians.
231
The Parker Service Master CONNECT V1.0/04/20
Operation