Parker Service Master CONNECT, Operating Manual

Page: 213 / 278

ENGLISH
6.5.5 Trigger Logic
The
Trigger logic
measuring method starts recording of the measured
values after one or two defined triggers are triggered.
Recording is stopped after one or two defined triggers are triggered.
INFORMATION
Please note that you must define the start/stop conditions in order to
be able to use this measuring method.
Select between the following combinations as the start conditions for
the measurement:
■
Condition A
■ Conditions A and B
■
Conditions A or B
Select between the following combinations as the stop conditions for
the measurement:
■
Condition C
■
Conditions C and D
■ Condition C or D
The following triggers are available for the start conditions:
Trigger A Trigger B Trigger C Trigger D
Level Level Level Level
Window Window Window Window
Time Time
External External External External
Keystroke Duration
Channel
warning value Channel
warning value
Channel alarm
value Channel alarm
value
213
The Parker Service Master CONNECT V1.0/04/20
Operation