Introduction
6 (31)
192-011003N7 DOC-0001-01-B
11.12.23 11:39
2.4
Type identification plate PSD1-S and PSD1-M with Safety
Option Board
The present device type is defined by the type specification plate (on the housing):
1
Order code of the device
2
Input voltage
3
Input Current
4
Serial Number
5
Output voltage
6
Output current
7
Output frequency
8
UL certification
(corresponding to the existing
logo)
9
Type of safety certification
2.5
Designated use
The device is designed for operation in electric power drive systems (EN 50178). Motion
sequences can be automated with this device. Several motion sequences can be can
combined by interconnecting several of these devices. Mutual interlocking functions must
be incorporated for this purpose.
Please respect the
technical data
(see page 25)!
Exceeding / not respecting its intended use or its limits may cause danger.
•
Motion sequence may not be carried out correctly which can cause personal injuries or
material damages.
•
The device might be destroyed what could result in fire.
•
The device corresponds to EN 61800-3, i.e. it is subject to limited sale. The device can
emit disturbances in certain local environments. In this case, the user is liable to take
suitable measures.
2.6
Packaging, transport, storage
Packaging material and transport
Caution!
The packaging material is inflammable, if it is disposed of improperly by burning, lethal
fumes may develop.
The packaging material must be kept and reused in the case of a return shipment.
Improper or faulty packaging may lead to transport damages.
Make sure to transport the drive always in a safe manner and with the aid of suitable
lifting equipment (
Weight
(see page 25)). Do never use the electric connections for lifting.
Before the transport, a clean, level surface should be prepared to place the device on. The
electric connections may not be damaged when placing the device.
First device checkup
•
Check the device for signs of transport damages.
•
Please verify, if the indications on the Type identification plate correspond to your
requirements.
•
Check if the consignment is complete.