Chapter 2: Installing the Monitor
Selecting a Location
PHM/PM User Guide
2-4
Accessing Ports and Other Controls
As shown in Figure 2-1, a +24VDC power connector, USB and serial
touchscreen port, analog video input port, DVI-D video input port, and the
on-screen display controls (OSD) are located on the left side of the unit on
the PHM model of the monitor. The PM1 model does not have a DVI-D or
USB touchscreen connector. Be sure to design your enclosure with these
locations in mind.
Figure 2-1: Monitor Ports - PHM
Important
To be compliant with CE EMC emission requirements under
EN55011, all video, serial, and parallel port communication
cables must be 100% braided shielded cable.
Ground stud
Power connector
USB touchscreen
Serial touchscreen
Analog video
DVI-D video
OSD controls
