Parker PHD28, User Manual, Page: 50 / 157

42 PHD
Mounting the PHD
To mount the PHD into a vehicle mounting panel,
1. Install the PHD from the front.
2. Ensure that:

the PHD is oriented to the operator's viewing angle

the wire harness connects easily to the connectors and that the bend radius
is adequate

the harness is shielded from harsh impact
3. Secure the PHD using 4 screws or metal spring clips.
4. Install the bezel, typically provided by the customer (Parker does sell a snap-
on cosmetic bezel as an optional accessory).
The PHD may also be mounted from the rear of the panel without a bezel for a
flush appearance using insert studs and nuts.
Refer to the PHD drawing for panel cut-out dimensions:
Drawings and other documents may be found at www.parker.com/ecd or contact
your Parker representative.
9. Mounting the PHD