Parker MSG17-4022-IB/UK Instruction Book Download Page 46 | Manualshive

Page: 46 / 54

Parker MSG17-4022-IB/UK Instruction Book Download Page 46

Parker Pro Display 12 Instruction Book

46/54

Header Link to Contents

8.2.5. Polarity reversal

The module is protected against power supply polarity reversal and over-voltage,

provided an external fuse is being used.

Warning! Risk of damage to equipment or degradation of signal
If this fuse is not used, polarity reversal can damage the unit.

9.1. Procedures with software

Initializing Pro Display, serial products (88PROD12AS10):

A. Insert USB stick with the system ID file and certified application packages.

B. Turn on the Pro Display.

C. The system will boot and install the new System ID and application packages

from the USB stick.

D. When the installation is completed, the setup application is removed and the

system restarts.

Pro Display, development units (88PROD12AS10 with development unit SW licence):

•

Application packages can be installed using the Maintenance App.

9. Start-up

«
...
44
45
46
47
48
...
»

Summary of Contents for MSG17-4022-IB/UK























































Reviews:

No comments