Parker MSG17-4022-IB/UK, Instruction Book, Page: 15 / 54

Parker Pro Display 12 Instruction Book 15/54
Header Link to Contents
Generic CAN protocols are supported on the CAN buses, which allows for the possibility
to connect Pro Display to third party modules.
Pro Display also supports WLAN and Bluetooth wireless communications and therefore
it can be connected to mobile phones, tablets, laptop computers etc. for audio
streaming, video sharing and overall data communication between the devices.
HMI is implemented by a projective capacitive touchscreen and a high performance
TFT-LCD display panel. All I/O are protected against short circuit to GND and VBatt as
well as against reverse polarity. Pro Display is intended for systems using either nominal
12 or 24VDC voltage. The unit has a wide supply voltage range – from 9 to 36VDC.
CAN
CONTROLLER
CAN
CONTROLLER
C
AN
BU
S
2
CAN
CONTROLLER
CAN
CONTROLLER
C
AN
BU
S
3
ETHERNET
DEVICE
ETHERNET
IO EXPANSION
BT,
BT HF
WIFI
CAN
DEVICE
CAN
DEVICE
C
AN
BU
S
1
SPEAKERS
MIC IN
LINE IO
VIDEO IN 1
VIDEO IN 2
CAMERA A
CAMERA B
C
AN
BU
S
4
CAMERA C
CAMERA D
VIDEO IN 3
VIDEO IN 4
AUDIO
DEVICE
PRO DISPLAY 12
LINE OUT
LINE OUT
Figure 3: Pro Display 12 system overview. This figure shows just one possible application.