MM40-107/30-107 COMPONENT MAINTENANCE MANUAL WITH IPL
FOR MAIN WHEEL ASSEMBLY PART NO. 40-107 SERIES AND
MAIN BRAKE ASSEMBLY PART NO. 30-107 SERIES
Page 4
Feb 01/02
CAUTION:
MARK EACH PISTON AND BORE TO ENABLE CORRECT
REASSEMBLY.
2.1.6
The pistons (9-40 or 10-40) may be removed by threading one of the
back plate attachment bolts (9-5 or 10-5) into each piston in
succession, and with hand pressure, push each piston out of the
brake cylinder.
2.1.7
Remove the O-rings (9-55, -55A or 10-55, -55A) from cylinder.
2.1.8
If necessary, the anchor bolts (9-100 or 10-100) may be removed by
using a holding fixture and arbor press. Place the anchor bolts into
the holding fixture so that the anchor bolt is piloted while being
removed.
CAUTION:
CYLINDER MUST BE SQUARE WITH ARBOR IN STEPS “A”
AND “B” SO THAT THE ANCHOR BOLTS DO NOT COCK.
Anchor Bolt Removal and Installation
Figure 1
