MM40-107/30-107 COMPONENT MAINTENANCE MANUAL WITH IPL
FOR MAIN WHEEL ASSEMBLY PART NO. 40-107 SERIES AND
MAIN BRAKE ASSEMBLY PART NO. 30-107 SERIES
Page INTRO-1/1
Feb 01/02
INTRODUCTION
This manual is published for the guidance of personnel who are responsible for the maintenance
functions of the Parker Wheel & Brake Assembly(ies) covered in this publication. The instructions
published herein contain the necessary information to perform maintenance checks “on aircraft” as
well as complete shop repair of the assemblies.
NOTE:
For information not specifically covered in this manual, refer to the Component
Maintenance Manual, AWBCMM0001, current issue. It is a reference publication
generically written to address the common practices and procedures used to inspect,
troubleshoot and overhaul most General Aviation external type wheels and brakes.
While Parker Hannifin Corporation represents that information contained in this manual was current
at the time of publication of this issue, the user is cautioned to inquire as to whether a more recent
revision is in existence before proceeding with maintenance operations. To accomplish this, users
can contact Parker directly at the following:
Parker Hannifin Corporation
Aircraft Wheel and Brake
1160 Center Road
Avon, Ohio 44011 U.S.A. Attn: Customer Service
1-800-272-5464 (Phone)
(440) 937-5409 (Fax)
NOTICE
The procedures outlined in this manual may be altered if better and/or more economical methods
can be employed by the individual facilities. However, the alternate procedures must not lessen the
efficiency of operation of the assembly, and all torque and specific limits or values contained herein
must be strictly observed. If deviations are questionable, contact Parker Engineering at the above
number.
