icountOS Oil Sampler Manual
23
GB
bk
bl
Press
POWER
switch. Check charge
levels and connect power supply if
necessary (see page 16).
Press
PUMP
switch
bm
Results displayed
Removing the PRV and hose fittings
1
2
Disconnect hose ends
from customer drain/
hydraulic system.
3
Switch off the inlet pressure and the
POWER
switch before removing the
hoses. The power light may still flash
if connected to a mains supply.
To remove the PRV, press down on
the removal tool and pull the PRV out.
There may be a small fluid leakage
here.
4
5
6
To remove
OUTLET
(Ø 4mm) hose,
press down the connector sleeve and
pull the hose out.
To avoid fluid leaking after use, fit the
blanking plugs (ACC6NN033)
Close the unit
INLET
OUTLET
