icountOS Oil Sampler Manual
21
GB
7
Press
PUMP
switch
Removing the hose fittings
1
2
Disconnect hose ends
from customer drain/
hydraulic system.
3
Switch off the inlet pressure and the
POWER
switch before removing the
hoses. The power light may still flash
if connected to a mains supply.
To remove
INLET
(Ø 6mm) hose, press
down the connector sleeve and pull
the hose out. There may be a small
fluid leakage here.
4
5
6
To remove
OUTLET
(Ø 4mm) hose,
press down the connector sleeve and
pull the hose out.
To avoid fluid leaking after use, fit the
blanking plugs (ACC6NN033)
Close the unit
