Parker Hyperchill Plus, User Manual

Page: 7 / 54

English
5 / 8 ICEP003-005 (60Hz)
4.4.3 Energy saving temperature control
PARAMETER CODE TYPE DEFAULT
energy saving enable
ESE
D
OFF
Set energy saving
SEt_ES
D
C°
20.0
F°
68.0
4.4.4 Compressor parameters
PARAMETER CODE TYPE DEFAULT
Minimum `On’ time.
dAS
F
2
Minimum time between two com-
pressor switch-ons.
dES
F
5
Compressor hour counter 1
AbCI
D
0
4.4.5 B1, B2 sensor parameters
PARAMETER CODE TYPE DEFAULT
High temperature alarm (water)
HA1
D
C°
60
F°
140
Low temperature alarm (water)
LA1
U
C°
-20
F°
-4
High temperature alarm
(evaporator)
HA2
U
C°
60
F°
140
Low temperature alarm (evapo-
rator)
LA2
U
C°
3
F°
37.4
4.5 Change parameters
4.5.1 Parameter (
SEt
/
dIFI
/
dEF
)
Fig.2
set
set
set
set
set
PAr
esc set
Y
Y
set
Y
P_nA tEr
CnP r9E
Y Y
PbI
Y Y
Ar9
Y
HA1
Y
C1H
Y
Y
C1H2
SEt
Y
diFI
CF30 CF31 CF32
dEF
Y
Y
Y
Y
Y
4.5.2 Water temperature setting (see fi g.1/2)
1. Turn the main swicth (QS) to “ON” and wait for the “
OFF
” visualiza-
tion.
2. Press the buttons “
esc
” “
set
” together to enter on the parameter
type “ D” .
3. Select the parameter “
PAr
”using “ ”and “ ” buttons and
press the button “
set
” to enter.
4. Select the parameter “
tEr
”using “ ”and “ ” buttons and
press the button “
set
” to enter.
5. Select the parameter “
SEt
”using “ ”and “ ” buttons and
press the button “
set
” to enter.
6. Change the value using “ ”and “ ” buttons and press the but-
ton “
set
” to confi rm and exit.
7. Press the button “
esc
” three times to exit.
4.5.3 Differential setting (see fi g.1/2)
1.Turn the main swicth (QS) to “ON” and wait for the “
OFF
” visualiza-
tion.
2.Press the buttons “
esc
” “
set
” together to enter on the parameter
type “ D”
3.Select the parameter “
PAr
”using “ ”and “ ” buttons and
press the button “
set
” to enter.
4. Select the parameter “
tEr
”using “ ”and “ ” buttons and
press the button “
set
” to enter.
5. Select the parameter “
dIFI
”using “ ”and “ ” buttons and
press the button “
set
” to enter.
6. Change the value using “ ”and “ ” buttons and press the but-
ton “
set
” to confi rm and exit.
7. Press the button “
esc
” three times to exit.
4.5.4 Restore default parameters (see fi g.1/2)
1.Turn the main swicth (QS) to “ON” and wait for the “
OFF
” visualiza-
tion.
2.Press the buttons “
esc
” “
set
” together to enter on the parameter
type “ D”
3.Select the parameter “
PAr
”using “ ”and “ ” buttons and
press the button “
set
” to enter.
4. Select the parameter “
P_nA
”using “ ”and “ ” buttons and
press the button “
set
” to enter.
5. Select the parameter “
dEF
”using “ ”and “ ” buttons and
press the button “
set
” to enter.
6. Change the value “
OFF
” to “
On
” using “ ”and “ ” buttons
and press the button “
set
” to confi rm and exit.
7. Press the button “
esc
” three times to exit.