manualshive.com logo in svg

Parker Helac PowerTilt Series, Service And Repair Manual

Share
Download
Parker Helac PowerTilt Series Service And Repair Manual Download Page 46

PowerTilt Tilting Coupler

PowerTilt Series Service & Repair Manual

HY34-1410 

46

Parker Hannifin Corporation

Helac/Cylinder Division

Enumclaw, Washington USA

www.parker.com/helac

3.

  Confirm proper timing by aligning the piston 

sleeve assembly (03) timing marks with the 

housing ring gear (1.4) timing marks.

4.

  Then using a plastic or rubber mallet and 

mandrel, engage the piston sleeve (03) into 

the housing ring gear (1.4). Continue tapping 

until the piston sleeve bottoms out against 

the housing ring gear.

1.

  Before installing the piston sleeve assembly 

(03), coat the piston and housing bore with  

high quality hydraulic oil to reduce chance of 

seal damage.

2.

  Carefully slide the piston sleeve assembly (03) 

into the housing (01). Gently tap the piston 

to compress the seals through the housing 

chamfer. Continue tapping  until the piston 

sleeve contacts the housing ring gear (1.4).

Assembly

Piston Sleeve Installation

Summary of Contents for Helac PowerTilt Series





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands