PowerTilt Tilting Coupler
PowerTilt Series Service & Repair Manual
HY34-1410
18
Parker Hannifin Corporation
Helac/Cylinder Division
Enumclaw, Washington USA
www.parker.com/helac
Several basic tools are required for the
disassembly and reassembly of the PowerTilt.
The suggested tools are outlined below:
1.
Brush
2.
Customized end cap tool
3.
Customized seal tools
4.
Permanent marker
5.
Flashlight
6.
Hex driver
7.
Hex wrenches
8.
Large socket wrench
9.
Plastic or rubber mallet
10.
Plastic mandrel
11.
Pry bar
12.
Safety glasses
13.
Threaded bolts
14.
Torque wrench
NOTICE
All fasteners are metric.
1.
2.
3.
5.
6.
7.
8.
14.
13.
12.
10.
9.
11.
4.
Making a Seal Tool
The seal tool is merely a customized standard
flat head screwdriver.
1.
Heat the flat end with a torch until it glows.
2.
Secure the heated end of the screwdriver
in a vise and bend the heated end to a
slight radius.
3.
Round off all sharp edges of the heated
tip to a polished finish. The tool may be
modified slightly to your own personal
preference.
Tools
Tools Required
