Safety
PLEASE NOTE: THIS IS HAUSER GERMANY MANUAL.
FOR USA NOMENCLATURE PLEASE GOTO PARKERMOTION.COM
6
1.4 Safety-conscious
working
1.4.1 Following
the
advice
In all work which involves the installation, the start-up, the set-up, the operation, the modification
of conditions of use and operation methods, maintenance, inspections and repairs, the advice
given in the start-up instructions must be followed.
1.4.2 Operating
personnel
The following work may only be carried out by correspondingly trained and authorised per-
sonnel:
1. Mounting and calibration work on the linear actuator
2. Attachment of safety limit switches (initiators)
3. Attachment and connection of the drive and checking the direction of rotation
1.5 Safety notices for the user company
Supervisors must familiarise themselves with both the whole chapter on "Safety" and the
necessary handling of the linear actuator.
Supervisors must ensure that the chapter on Safety and the description of the corresponding
handling have been read, understood and are being maintained by the personnel responsible
for mounting and operation.
The linear actuator must only be operated when in perfect condition.
1.6 Safety notices for the operating personnel
Do not use any method of working which adversely affects the operating safety of the linear
actuator.
The operating personnel and supervisory staff are obliged to check the linear actuator and the
machine at least once per shift for any signs of external visible damage or faults, any changes
which have occurred ( including the operating behaviour) which adversely affect the safety, and
to report these immediately.
Components and accessories have been specially designed for the product. In acquiring
replacement parts and replacing worn parts, only our genuine replacement parts must be used.
We would like to make you paricularly aware that genuine parts and accessories not supplied by
us have also not been checked and released by us. The installation and/or use of such products
can therefore, under certain circumstances, have an adverse effect on the constructional
characteristics of the machine and thus affect active and/or passive operating safety.
We accept no liability as manufacturers for damage arising through the use of non-genuine
parts and accessories.
On no account may any safety fixtures be removed or overridden.
Protective fixtures may not be made ineffective or bypassed.
The relevant requirements and national accident-prevention regulations are always to be com-
plied with when installing and operating our mechanical linear actuators.
