Parker Hannifin Corporation
Automation Actuator Division
Wadsworth, Ohio
28
Automation
Stepper and Servo Driven Linear Actuators
PM-ET01/USA
ET Series
MODELS SMR-1L, SMD-1L LOW AMP REED SWITCH SPECIFICATIONS
Switching Logic:
Normally Open (SMR-1 L)
Normally Closed (SMD-1 L)
Voltage Rating:
85-125 VAC (N.O.)
5-24 VAC (N.C.)
5-24
VDC* (N.O.)
5-24
VDC* (N.C.)
Power Rating:
AC or DC Resistive Load:
10 watts (N.O.)
AC or DC Inductive Load:
5 watts (N.O.)
AC or DC:
3 watts (N.C.)
Switching Current Range:
Resistive Load (PC, Sequencer):
5-40 mA (N.O.),
5-25 mA (N.C.)
Inductive Load (Relay):
5-25 mA
Minimum Current for LED:
5mA
Switching Response:
300 Hz (N.O.), 200 Hz (N.C.)
Breakdown Voltage:
200VDC
Contact Resistance:
100M Ohm minimum.
Operating Temperature:
-10
°
to 85
°
C (14
°
to 185
°
)**
Lead Termination:
1500 mm (60 In) or 150 mm (6 in) with connector
Industrial Protection:
IP67
Shock Resistance:
30 g’s, 300 m/sec2
*Polarity restriction for DC operation: (+) to brown
and (-) to blue.
**Exceeds temperature range for ET series mechanical components
NOTE: Use care not to exceed the switch’s power rating while operating within the switch’s voltage and current limits.
MODELS SMR-1 HIGH AMP SWITCH SPECIFICATIONS
Switching Logic:
Normally Open
Voltage Rating:
85-125 VAC
5-24
VDC*
Power Rating:
AC or DC Resistive Load:
10 watts
AC or DC Inductive Load:
5 watts
Switching Current Range:
Resistive Load (PC, Sequencer):
30-300 mA
Inductive Load (Relay):
30-100 mA
Minimum Current for LED:
18 mA
Switching Response:
300 Hz
Breakdown Voltage:
200VDC
Contact Resistance:
100M Ohm minimum
Operating Temperature:
-10
°
to 85
°
C (14
°
to 185
°
)**
Lead Termination:
1500 mm (60 in.) or 150 mm (6 in.) with connector
Industrial Protection:
IP67
Reed Switch Specifications
Shock Resistance:
30 g’s, 300 m/sec2
*Polarity restriction for DC operation: (+) to brown
and (-) to blue.
**Exceeds temperature range for ET series mechanical components
