Parker ChemTec II, Installation, Operating, & Maintenance Instructions

Page: 6 / 68

6
Standards
EN 61326-1:2006, Class B
EN 6100-3-2:2006
EN 6100-3-3:1995 +A1:2001 +A2:2006
EN 61010-1 Issued: 2001/03/01
Conforms to UL STD 61010-1:2012 Ed.3+R:29Apr2016
Certified to: CAN/CSA-C22.2 No 61010-1-12:2012 Ed.3+U1:U2
Installation & Start-Up
Installation of the ChemTec II must be carried out only by trained personnel in accordance with the relevant
regulations and this operations manual.
Make sure that the technical specifications and input ratings of the ChemTec II are observed. See “ChemTec II
Specifications”.
The protection provided by this equipment may be impaired if the ChemTec II is used in a manner
inconsistent with this manual or for purposes not specified by the manufacturer.
Maintenance & Cleaning
The ChemTec II is practically maintenance free. The Tandem peristaltic pump head should periodically have
tubing debris cleaned from it, but requires no lubrication.
To remove dust, dirt and stains, the outer surfaces of the ChemTec II may be wiped down using a soft, non-
fluffing cloth moistened with water. If required, you may also use a mild detergent or Isopropanol.
The SciPres II disposable sensors used with the system come pre-calibrated from the factory and require no
maintenance. The SciPres II disposable sensors may be sanitized with 0.1 Molar NaOH, or Isopropanol. They
may be autoclaved once.
Introduction
You will find the ChemTec II easy to setup and use for your metering and pH control needs. The state-of-the-
art hardware and software design of the ChemTec II allows you to control measure and document your
metering processes. With proper maintenance, the ChemTec II will provide many years of excellent service
and performance.
Please read the following instructions carefully!
Inspections: Remove the products carefully from the shipping container. Check the contents against the
purchase order to verify that all parts are included and undamaged.
Please do the inspection upon receipt of the product, even if you don’t intend to use it immediately. Many
carriers must receive damage claims within 7 days of delivery. Please retain all packing material so unit may
be shipped safely, if necessary.