Parker ChemTec II, Installation, Operating, & Maintenance Instructions

Page: 40 / 68

40
Digital Alarm Configuration
Alarms may be configured for the Digital Inputs if connected.
Digital Alarm 1
This alarm may be enabled or disabled and set to trigger if low or
high.
These inputs default to a high input and will trigger immediately if set
to high, enabled, and not pulled low by the attached device.
Alarm Log
All alarms are logged in red text while the unit is powered. Once
acknowledged, they will be listed in the history list below the alarm
list. This data is not exportable at this time.
System Information
From the main screen, tap on the Sys Info button in the lower left
corner to see this screen display:
•
System (Model)
•
Serial Number
•
Firmware Version
•
Pump Head installed
•
Motor installed
•
Last Maintenance date
•
Next Maintenance date
Selecting DH MAINTENANCE will bring up a password screen used by
the Service Department to update this information.