7
INSTALLATION, OPERATION, AND MAINTENANCE MANUAL ALIGN™ MULTI-GAS GENERATOR
To guarantee the optimum efficiency of the nitrogen and dry air membranes it is recommended that
the ALIGN Multi-Gas Generator be run at or below the recommended pressure and flow for each of
the outlet gases, as laid out in the Technical Specifications, Section 3.2.
3 DESCRIPTION
The ALIGN Multi-Gas Generator is intended to supply lab-grade nitrogen, dry air and zero air to
LC-MS and other instrumentation systems within a laboratory setting.
3.1 Intended Use
This specification is valid when the equipment is located, installed, operated, and maintained as
specified within this manual.
3.2 Technical Specifications
System Specifications
Regulatory Information
CSA Certification Standard
CAN/CSA C22.2 No. 61010-1-12 3rd Edition
IEC Standard
IEC 61010-1: 2010
UL Standard
UL 61010-1
IEC 61010 Installation
Category II
IEC 61010 Pollution
Degree 2
Impact Code
IK08
EMC Compliance
EN61326-1/CISPR 11
Generator Physical Specifications
Dimensions (L x W x H)
34.5” (87.6 cm) x 23.74” (60.3 cm) x 24.62” (62.5 cm)
Product Weight
333 lbs (151 kgs)
Shipping Weight
575 lbs (261 kgs)
Sound Level
<55 dB(A) at 1 meter
Heat Dissipation
5221 BTU/Hour
Drain Port
1/4” Tube
Outlet Gas Specifications
Nitrogen Gas Purity
1
up to 99% N2 with respect to O2
Nitrogen Gas Organics
Elimination of up to 99.999% organics
Nitrogen Gas Max Flow/Pressure
19 SLPM/80 psig (5.5 barg, 552 kPa)
Air 1 Purity
1
<0.1 ppm total hydrocarbons / -35°F (-37°C) atm
dew point
Air 1 Max Flow/Pressure
25 SLPM/110 psig (7.6 barg, 758 kPa)
Air 2 Purity
1
<0.1 ppm total hydrocarbons / -35°F (-37°C) atm
dew point
Air 2 Max Flow/Pressure
25 SLPM/110 psig (7.6 barg, 758 kPa)
Suspended Liquids
None
IOM_PKR_Align Multi-Gas Generator_022021.indd 7
IOM_PKR_Align Multi-Gas Generator_022021.indd 7
2/17/2021 1:11:41 PM
2/17/2021 1:11:41 PM
