21
INSTALLATION, OPERATION, AND MAINTENANCE MANUAL ALIGN™ MULTI-GAS GENERATOR
7.3. Resetting the Temperature Switches
Before checking the temperature switches, ensure the generator is unplugged and depressurized.
Front Temperature Switch:
1. Remove the front panel of the generator with the two self-retaining screws.
2. In the upper left-hand corner there is a red temperature switch. If this temperature switch
has been triggered, the button will have popped out. Ensure that the button is depressed.
3. Replace the front cover.
Rear Temperature Switch:
1.
Remove the top cover by first removing the black screw caps with a small flathead screw
-
driver. Remove the screws with a Philips screwdriver. Push the cover towards the rear of
the generator and lift to remove.
2. The temperature switch is located in the rear left-hand corner. If this temperature switch
has been triggered, the button will have popped out. Ensure that the button is depressed.
3. Replace the top cover.
IOM_PKR_Align Multi-Gas Generator_022021.indd 21
IOM_PKR_Align Multi-Gas Generator_022021.indd 21
2/17/2021 1:12:18 PM
2/17/2021 1:12:18 PM
