Bulletin TI-NITROFLOW TG2-G
Installation, Operation and Maintenance Manual
TI-NITROFLOWTG2
www.labgasgenerators.com
4
1-800-343-4048
The design of the oil-less rotary scroll compressor offers high reliability and quiet operation. The
scroll consists of two sets of identical spirals that are offset 180 degrees from each other. As one
scroll orbits around the other fixed scroll, air is trapped, compressed, and is then directed into the
center where it is discharged from the pump.
A high output fan cools the compressor cabinet as it blows over a series of fins on the after-
cooler. The compressor operates at a lower temperature, thus increasing bearing, tip seal, and
grease life. As the fan blows across the after-cooler, the air temperature is decreased and water
is condensed in both the after-cooler and in the receiver tank. The water is discharged through
the automatic electric drain valve that is connected to a disposal container.
Compressor Pump
Compressor
After Cooler
Figure 2B, Nitrogen Generator Flow for NitroFlow TG2
Figure 2A, Compressor Flow Schematic
(Zero Air)
(Zero Air)
(N2)
