20 of 20
598P/599P Application Manual
598/599P
EXTERNAL
STACK
CONTROLLER
EC
D
ECLARATIONS OF
C
ONFORMITY
Date CE marked first applied: 01/04/01
Low Voltage Directive
In accordance with the EEC Directive 2006/95/EC
We Parker SSD Drives, address as below, declare under our sole responsibility that the above
Electronic Products when installed and operated with reference to the instructions in the Product
Manual
(provided with each piece of equipment), is in accordance with the relevant clauses from the
following standard:-
EN50178 (1998)
The drive is CE
marked in accordance
with the low voltage
directive for electrical
equipment and
appliances in the
voltage range when
installed correctly
.
M
ANUFACTURERS
D
ECLARATIONS
Machinery Directive
The above Electronic Products are components to be incorporated into machinery and may not be
operated alone.
The complete machinery or installation using this equipment may only be put into service when
the safety considerations of the Directive 2006/42/EC are fully adhered to.
Particular reference should be made to EN60204-1 (Safety of Machinery - Electrical Equipment
of Machines).
All instructions, warnings and safety information of the Product Manual must be adhered to.
Since the potential
hazards are mainly
electrical rather than
mechanical, the drive
does not fall under the
machinery directive.
However, we do
supply a
manufacturer’s
declaration for when
the drive is used (as a
component
) in
machinery.
Dr Martin Payn (
Conformance Officer)
Parker Hannifin Manufacturing Ltd., Automation Group, SSD Drives Europe,
NEW COURTWICK LANE, LITTLEHAMPTON, WEST SUSSEX BN17 7RZ
TELEPHONE: +44 (0)1903 737000 FAX: +44 (0)1903 737100
Registered Number: 4806503 England. Registered Office: 55 Maylands Avenue, Hemel Hempstead, Herts HP2 4SJ
This manual was downloaded on www.sdsdrives.com
+44 (0)117 938 1800 - [email protected]
