54
WVM_BASIS_EN_03—07/2016
Filling vessel with new desiccant
Risk of falling!
Do not use the dryer as a climbing aid. The components are not designed
to bear such a load and may break.
Only use approved climbing aids when filling the vessel.
Note:
Filling can also occur via the main line socket. This is feasible if the
desiccant sieve is also cleaned or replaced (see page 52).
►
Ensure that discharge sleeve is
closed.
►
Unscrew the plug of the filling hole
with a suitable tool (see illustration).
►
Slowly fill in new desiccant and make
sure to heed the next step. Use a
funnel if necessary.
Unscrew the sleeve plug
►
Make sure to compact the filling in the vessel.
►
Equip the sleeve plug with a non-locking thread seal and screw in.
►
Repeat the procedure for the second vessel.
►
Restart the dryer if no other maintenance work is required.
►
Operate the dryer for two cycles, then shut it down again.
►
Replace silencer as described on page 49 and restart the dryer.
