19
UK
It will automatically under the charging state once the temperature returned to normal.
CAUTION:
Only use the provided battery charger for charging the battery. First place the
rechargeable battery into the charging slot in the charger and then connect the charger to
the mains. Charging starts automatically.
Remove the battery from the charge after it’s fully charged. (After about 60-80 min). Always
disconnect the charger from the mains before you remove the battery from the charger.
•
The charger and battery may become warm to touch while charging. This is a normal
condition, and does not indicate a problem.
•
Use the charger at normal room temperatures whenever possible. To prevent overheating,
do not cover the charger and do not charge the battery in direct sunlight or near heat
sources.
•
If the battery does not charge properly:
1) Check current at power outlet by plugging in a lamp or other appliance.
2) If charging problems persist, have the complete drill checked by an electrician or a
power tool technician.
BATTERY PROTECTION
The circuitry protects the battery pack from extreme temperature, over discharge, and overcharge.
To protect the battery from damage and prolong its life, the battery pack circuitry
will turn off the battery pack if it becomes overloaded or if the temperature becomes too
high during use.
Battery
The battery pack is equipped with Lithium-Ion rechargeable batteries. The duration of use
from each charge will depend on the type of work performed.
The battery in this wrench has been designed to provide maximum trouble free life. However
HP230-5KF, LED Status
Function
RED
ON
ON
OFF
FLASH
FLASH
FLASH
1.Charger plugged in
2.Charging
3.Fully charged
4.Abnormal charging
a)pre-charging
5.Serious failure
a)battery broken
b)temperature below 0°C
c)battery too hot
GREEN
OFF
FLASH
ON
OFF
FLASH
OFF
