![background image](http://html1.mh-extra.com/html/park-warehouse/4ft-deluxe-park-bench/4ft-deluxe-park-bench_manual_3691753005.webp)
Step #2:
Stand the other (
2
) bench ends upright, one at a time, and place the
bench board already attached to the first bench end, on position 1 being
sure to align the pilot holes with the pre-drilled holes in the bench end.
After the holes are properly aligned, fasten with (1) #12 x 3" Flat Head
Phillips Screw in
top
the
pre-drilled
.
hole
Note: Do not tighten screws completely. This will be done in a later step.