background image

Assembly Instructions

Assembly Instructions

0192095 Page 1 of 4

Assembly Instructions

Assembly Instructions

Important

Before you begin, read and comply with all safety and operating instructions, 

and ensure all parts and correct quantities are included.
Any parts damaged during shipment must be reported within 5 days of receipt.  

To report information regarding missing parts or damage, to purchase parts 

or accessories, or if you have any questions, please contact us.

www.spectrumfurniture.com

800-235-1262, 715-723-6750

Thank you for purchasing Spectrum products!

Esports Meta Desk - 37335

Esports Meta Desk - 37335

Esports Shadow Desk - 37339

Esports Shadow Desk - 37339

(1) Worksurface

(1) 021521

10-24 Keps nut

(9) 038064

#14 x 3/4” PHSM

(1) 025069

Glide Wrench

Hardware

3

/

8”

(4) 037779

5/16-18 x 1” 

Glide

(6) 0100167

8-32 x 1/2” PH 

Thrd ctg

(1) 0151223

Left Leg

(1) 0152137

Cord channel 

bottom

(3) 035728

1/4-20 x 1/2” 

PHMS

(3) 037542

#8 X 5/8” PHSM

0151838

Meta worksurface

0151201

Shadow 

worksurface

(1) 0152138

Cord channel 

front

(1) 0154472

Support panel

(1) 0151801

Worksurface 

support beam

Note: Do not tighten fasteners completely until all have been installed.  

Keeping them loose will help with alignment during assembly.

(1) 0151501

Right Leg

(1) 0150570

Headset 

hanger

(1) 0152128

Mid bracket

Summary of Contents for Esports Meta 37335

Page 1: ... for purchasing Spectrum products Esports Meta Desk 37335 Esports Meta Desk 37335 Esports Shadow Desk 37339 Esports Shadow Desk 37339 1 Worksurface 1 021521 10 24 Keps nut 9 038064 14 x 3 4 PHSM 1 025069 Glide Wrench Hardware 3 8 4 037779 5 16 18 x 1 Glide 6 0100167 8 32 x 1 2 PH Thrd ctg 1 0151223 Left Leg 1 0152137 Cord channel bottom 3 035728 1 4 20 x 1 2 PHMS 3 037542 8 X 5 8 PHSM 0151838 Meta...

Page 2: ...face like a carpeted floor Figure 1 2 Install the mid bracket as shown with 1 14 x 3 4 PHSM screw Figure 1 1 14 x 3 4 PHSM W o r k s u r f a c e Mid bracket Figure 2 Laminate leg panel insert 3 Attach legs to worksurface 3 Attach legs to worksurface 1 Attach each leg to the worksurface with 2 14 x 3 4 PHSM screws Do not tighten screws completely yet Figure 3 2 Install the 4 glides to the bottom of...

Page 3: ...4 20 x 1 2 PHMS 1 Align the cord channel front with the leg holes and mid bracket as shown Figure 4 1 Secure with 2 8 32 x 1 2 PH thread cutting screws and 1 10 24 Keps nut at the mid bracket 2 Align the cord channel bottom and secure to the cord channel front with 3 1 4 20 x 1 2 PHM screws Figure 4 2 3 Secure to each leg with 1 8 32 x 1 2 PH thread cutting screws 8 32 x 1 2 PH Thrd ctg 1 per leg ...

Page 4: ... the left or right side of the desk using 3 8 x 5 8 PHSM screws Figure 7 8 32 x 1 2 PH thrd ctg 2 per leg 8 Flip desk upright 8 Flip desk upright 1 Using two people carefully flip the assembled desk upright Figure 8 3 8 X 5 8 PHSM Support panel Headphone hanger Figure 8 W o r k s u r f a c e CAUTION Do not allow the desk legs to contact the floor until the table is completely flipped over Excessiv...

Reviews: