Fig #1:
In order to make the assembly of this
Deluxe
Bench easier while going through
the assembly process the board positions
are numbered and will be referenced in
later steps.
Step #1:
Stand (1) bench end upright and place (1) bench board on position 1 being
sure to align the pre-drilled holes
to the pilot holes
in the bench end. After
the holes are properly aligned, fasten with (1) #12
x
3
"
Flat
Head Phillips
Screw in the
top
pre-drilled hole
.
Note: Do not tighten screw completely. This will be done in a later step.