•
Replace the nebuliser in the holder as soon as you have finished inhaling.
•
Switch the compressor o
ff
.
4 CLEANING AND DISINFECTION AT HOME
The nebuliser and the accessories used must be cleaned thoroughly after
each application and disinfected at least once a day.
The connection tubing cannot be cleaned or disinfected.
4.1 Preparation
•
Detach the connection tubing from the nebuliser.
•
Make sure that all medication residues are removed from the nebuliser.
•
Dismantle the nebuliser into its individual parts.
•
Carefully pull the blue expiratory
valve out of the slot in the
mouthpiece. The valve must still be
attached to the mouthpiece.
•
Rinse all components of the
nebuliser under running tap water.
This must be done especially
thoroughly if cleaning and disinfection are not carried out straight
away.
4.2 Care of the connection tubing
•
Connect the connection tubing to the compressor.
•
Switch the compressor on.
•
Leave the compressor running until any condensation in the
connection tubing has been removed by the air flowing into it.
4.3 Cleaning
•
Place all disassembled components in
warm tap water with a little
dishwashing liquid for at least 5 min. If
necessary, use a clean brush to
remove loose dirt (the brush must be
reserved exclusively for this purpose).
of
9
13
Summary of Contents for LC SPRINT SPA
Page 1: ...of 1 13...
