Inadequate disinfection encourages the growth of bacteria and thus
increases the risk of infection. Thorough disinfection has not been
completed until the disinfector automatically switches itself o
ff
, or the
minimum disinfection time specified in the instructions for use of the
disinfector has elapsed. Therefore, do not switch the device o
ff
prematurely. Also make sure that the disinfector is kept clean and regularly
check that it is in good working order.
With a microwave disinfector
Microwave disinfectors ensure e
ff
ective
disinfection of the product components in a
standard commercial microwave oven.
Place the product components in the disinfector
with enough space between them to allow the
steam to reach all surfaces reliably.
Maintain the following times when disinfecting:
Information about the amount of water required and about the disinfection
process is included in the instructions for use of the devices in question
(disinfector and microwave).
CAUTION
The product components must not be exposed to microwave radiation
unless they are in a microwave disinfector. If they are heated in a microwave
oven without the protection of the disinfector, the
individual parts will be
damaged.
Do not use the grill function because this too will
damage the individual
parts.
At the end of the disinfection process, the parts may still be very hot.
Therefore, it is essential to wait for the cooling time to pass before taking the
parts out, otherwise there is a
risk of burns.
Inadequate or ine
ff
ective disinfection encourages the growth of bacteria and
thus increases the
risk of infection.
Disinfection is not completed properly
Wattage
Disinfection time
Cooling time
850 – 950
4 min.
2 min.
600 – 850
6 min.
2 min.
of
11
13
Summary of Contents for LC SPRINT SPA
Page 1: ...of 1 13...