background image

  • 

Rinse all parts thoroughly in running water. 

  • 

You can remove excess water more quickly by shaking all parts. 

4.4 Disinfection  

After cleaning, disinfect the dismantled nebuliser and accessories used 

(except for the connection tubing). E

ective disinfection is only possible if 

the nebuliser has been cleaned. 

Information when using masks with rubber bands: 

The rubber band can only be cleaned as it might be damaged by the high 

temperatures used during disinfection.  

CAUTION 

A damp environment may encourage the growth of bacteria. Therefore, 

remove all parts from the pot or disinfector as soon as disinfection has 
finished. Dry the parts. The 

risk of infection

 is reduced when the parts are 

dried completely. 

 

In boiling water 

  • 

Place all the individual parts in boiling water for at least 5 minutes. 

Use a clean pot and fresh water with reduced calcium content, if 

possible. 

         Plastic will melt if it comes into contact with the hot base of the pot. 

Therefore, make sure there is plenty of water in the pot. This way you 

will avoid damaging the components. 

  • 

You can remove excess water more quickly by shaking all parts. 

Using a standard thermal disinfector for baby bottles (not a microwave 

oven)  

For e

ective disinfection, use a disinfector with a runtime of at least 6 

minutes. Regarding disinfection, the duration of the disinfection procedure 

and the quantity of water required for this, follow the instructions for use of 

the disinfector you are using.

CAUTION  

 of 

10

13

 

 

Summary of Contents for LC SPRINT SPA














Reviews: