3.2 Filling with medication
For optimum aerosol generation, fill the nebuliser with at
least 3 ml medication.
NOTICE
Take care to ensure that the cap only moves in the direction
allowed by the hinge. Otherwise the
nebuliser cap might
snap off.
• Insert the nebuliser in the holder on the compressor inten-
ded for this purpose.
• Open the nebuliser cap by
pressing your thumb against
the underside of the cap.
• Pour the quantity of medication
prescribed by your doctor into
the nebuliser nozzle attach-
ment.
Be sure to follow the instruc-
tions regarding the minimum
and maximum fill volumes
[see: Technical data,
page 65]. If the nebuliser con-
tains too little or too much
medication, nebulisation, and
thus also the treatment, will be
greatly impaired.
• Close the nebuliser cap.
Make sure that the cap snaps into place.
If you are to inhale several medications one after the other in
one application, rinse out the nebuliser with tap water between
inhalations. Remove excess water by shaking the nebuliser
and then fill with medication as described.
– 47 –
