Gener
al
Information
Pr
epar
e
Oper
ate
Help
Technology
Annexes and technical documentation
125
22.4 Log of instructions upon supply
Due to the flexible setting options of the Biolution, the following information should be observed:
When using the tilt function:
›
It must be ensured that the seat is not tilted too far forwards or backwards, as otherwise you could slip
out of the seat.
›
The tilt function is set to your weight.
›
Tilt the wheelchair first, then set the backrest.
›
Always wear the seatbelt when using the tilt function.
›
When using the tilt function, only half the speed of the selected movement level is possible.
Seat / backrest in the special orthopaedic seat
›
The backrest must only be adjusted as far as is necessary, as the motor is not powerful enough to lift the
weight of the driver. Use the tilt function first.
›
When adjusting the backrest and the tilting angle, be aware of attachments (rucksack, etc.).
Lifting arm
›
When raising and lowering the seat, be aware of head and leg space, the footrests must not be in contact
with the floor.
›
When raising the seat, the Biolution will only travel at half speed after approx 100mm.
