Paravan PR Biolution User Manual Download Page 119

Page: 119 / 127

Gener

Information

epar

Oper

ate

Help

Technology

Electromagnetic compatibility (EMC)

119

21.2 Compliance level

The interference immunity levels in accordance with IEC 60601 are fulfilled.

Manufacturer's declaration - electromagnetic interference

Biolution is designed to be operated under the electromagnetic conditions specified below. The customer or

the user of the device should ensure that it is used under these conditions.

Emission measurements

Compliance

Electromagnetic conditions -

guidelines

HF emissions in accordance with

CISPR11

Group 1

Biolution only uses HF energy for

its internal functions. Therefore its

HF emissions are very low, and it

is unlikely that adjacent electronic

devices will be disturbed by these.

HF emissions in accordance with

CISPR11

Class B

The device is designed to be used in

all set-ups including living areas and

those which are directly connected

to a public power grid that also

supplies power to buildings being

used for living purposes.

Emission of harmonics in accordance

with IEC61000-3-2

Class A

Emission of voltage fluctuations/

flickers in accordance with IEC61000-

3-3

fulfilled

Table 201 in accordance with DIN EN 60601-1-2, 6.8.3.201

Summary of Contents for PR Biolution
































































































































Search results

Summary of Contents for PR Biolution

Reviews:

Brands by name

Popular brands

Paravan PR Biolution, User Manual

Search results

Summary of Contents for PR Biolution

Reviews:

Brands by name

Popular brands