Paravan PR Biolution User Manual Download Page 105

Page: 105 / 127

Gener

Information

epar

Oper

ate

Help

Technology

Electrical unit

105

19.5 The lighting installation

Depending on the version, the PARAVAN-Biolution is equipped with a

lighting installation using LED technology which is fully approved in road

traffic. Due to the LED lamps used, the wearing out or maintenance of

this installation is practically impossible/unnecessary. If your Biolution

has been supplied to you without a lighting installation, retrofitting one

is possible at any time.

Proceed in order as follows to switch on the lighting installation:

›

Select menu in the control unit.

›

Switch on the lighting installation.

)

See section “15 Control”

Parts of the lighting installation:

›

LED front headlamps



›

LED direction indicator



›

LED rear light



Fig. 68: Illumination at the front

Fig. 69: Illumination at the rear

Summary of Contents for PR Biolution
































































































































Search results

Summary of Contents for PR Biolution

Reviews:

Brands by name

Popular brands

Paravan PR Biolution, User Manual

Search results

Summary of Contents for PR Biolution

Reviews:

Brands by name

Popular brands